B&R Industrial Automation (a Business Unit of ABB) 8I66T200750.00-000
8I66T200750.00-000: Base device for ACOPOSinverter P66 and P64new, 3 x 200 to 240 V, 7.5 kW, integrated brake chopperOrder number - ACOPOSinverter P66:8I66T200750.0P-000: Inverter withPOWERLINKcommunication card8I66T200750.0X-000: Inverter withX2X Linkcommunication card8I66T200750.0C-000: Inverter with integrated CANopen interfaceOrder number - ACOPOSinverter P64new:8I64T200750.0X-000: Inverter withX2X Linkcommunication card
Технические характеристики
| CE | Yes |
|---|---|
| UL | UL E225616Power conversion equipment |
| CSA | CSA E272421Industrial control equipment |
| Specified on nameplate | 7.5 kW (10 HP) |
| Напряжение питания | 3x 200 VAC -15% to 240 VAC +10% |
| Frequency | 50 to 60 Hz ±5% |
| Apparent power (at 240 VAC) | 15.3 kVA |
| Max. assumed short-circuit current (lsc)(short-circuit current at connection point) | 22 kA |
| Inrush current | 35.2 A |
| At 200 VAC | 43.8 A |
| At 240 VAC | 36.9 A |
| Power dissipation at nominal load and nominal clock frequency | 324 W |
| Integrated EMC filter | No |
| Nominal output current | 33 A |
| At nominal clock frequency (4 kHz) | No derating (up to 50°C) |
| Other clock frequencies | The derating curves are included in the installation instructions, which can be downloaded from the website (www.br-automation.com). |
| Starting at 1000 m above sea level | 1%, per 100 m |
| Max. transient current for 60 s | 49.5 A |
| Output frequency range | 0.1 to 599 Hz |
| Nominal clock frequency | 4 kHz |
| Min. | 2 kHz |
| Max. | 16 kHz |
| With braking resistor | Up to 170% of the rated motor torque |
| Shielded cable | 50 m |
| Non-shielded cable | 100 m |
| Induction motor | Sensorlessvector control:1. With V/f characteristic curve for constant torque → Standard profile2. With V/f characteristic curve for quadratically increasing torque → Energy-saving profile, e.g. for fans and pumpsSensorlessslip control:1. With V/f characteristic curve for constant torque → Standard profile2. With V/f characteristic curve for constant torque (6 f-ranges) → Custom profile for special applications3. With V/f characteristic curve for quadratically increasing torque → Energy-saving profile, e.g. for fans and pumps |
| Synchronous motor | Sensorlessvector control:1. With V/f characteristic curve for constant torque → Standard profile |
| Main protective functions of inverter | Thermal protection against power stage overheatingProtection against short circuits between motor phases, overcurrent between output phases and ground, overvoltages on the DC bus, exceeding the speed limit.Safety function for: Over- and undervoltage of the power supply system, line phase failure with 3-phase supply |
| Integrated dynamic brake transistors | Yes |
| Min. resistance value (external) | 8 Ω |
| Напряжение питания | 24 VDC (-15%/+20%) |
| Current | 800 Ω |
| Напряжение питания | 24 VDC (-15%/+20%) |
| Max. output current at 24 VDC | 100 mA |
| Напряжение питания | 10 VDC (-0%/+10%) |
| Max. output current at 10 VDC | 10 mA |
| Type | Type 3 |
| Quantity | 1 |
| Напряжение питания | 30 VDC / 250 VAC |
| Input circuit | Source or sink |
| Switching threshold | Sink: >19 V (position 0), <13 V (position 1)Source: <5 V (position 0), >11 V (position 1) |
| Input - ACOPOSinverter | Yes |
| Input - Input | No |
| Sampling time | 2 ms |
| Max. input frequency | 20 kHz |
| Input impedance | 1.5 kΩ |
| Current consumption | 16 mA |
| Nonlinearity | ±0.3% |
| Basic accuracy | At 25°C: ±1%At -10 to 60°C: ±2% |
| Напряжение питания | 470 Ω |
| Resolution | 10-bit |
| Напряжение питания | 30 VDC |
| Output circuit | Source or sink |
| Max. current | 100 mA |
| Switching current range | Min. switching current: 5 mA at 24 VDCMax. switching current:R1 at cos φ = 1: 3 A at 250 VAC / 4 A at 30 VDCR2 at cos φ = 1: 5 AR1 and R2 at cos φ = 0.4: 2 A |
| Relay 1 | 1 changeover contact |
| Relay 2 | 1 normally open contact |
| Output - ACOPOSinverter | Yes |
| Output - Output | No |
| Время отклика | 2 ms |
| Output | 0 to 10 V or 0 to 20 mA |
| Update time | 2 ms |
| Degree of protection per EN 61800-5-1 | IP20 |
| Relative humidity per IEC 60068-2-3 | 5 to 95%, non-condensingNo dripping water |
| Maximum installation elevation | ≤1000 m without derating1000 to 3000 m with Derating |
| Max. pollution degree per IEC/EN 61800-5-1 | 2 (non-conductive pollution) |
| Ambient conditions per IEC 60721-3-3 | Class 3C3 and 3S2 |
| Operating position | Vertical mounting orientation ±10° |
| Operation | -10 to 50°C without derating50 to 60°C with derating |
| Storage | -25 to 70°C |
| Max. vibration resistance | 1 gn13 to 200 Hz EN/IEC 60068-2-61.5 mm peak to peak 2 to 13 Hz EN/IEC 60068-2-6 |
| Width | 150 mm |
| Height | 308 mm |
| Height without shield plate | 232 mm |
| Depth | 178 mm |
| Масса | 3.6 kg |