X20CHB2880

B&R Industrial Automation (a Business Unit of ABB) X20CHB2880

X20cHB2880: Hub expansion module; 2x hub 100 BASE-TX; The POWERLINK bus controller X20BC8083 and the stand-alone hubs X20HB8880 and X20HB8815 are equipped with a modular hub expansion. An additional 1 or 2 slots are available, depending on the bus base used. The X20HB2880 hub expansion module can be operated in these slots.; The status of the module and network are indicated by LEDs.

Технические характеристики

Hub2 Fast Ethernet hubs for hub expansion
Status indicatorsModule status, bus function
Module statusYes, using status LED
Bus functionYes, using status LED
Power consumption1.17 W
Additional power dissipation caused by actuators (resistive) [W]-
CEYes
ATEXZone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user's manual)FTZÚ 09 ATEX 0083X
ULcULus E115267Industrial control equipment
HazLoccCSAus 244665Process control equipmentfor hazardous locationsClass I, Division 2, Groups ABCD, T5
DNV GLTemperature:B(0 - 55°C)Humidity:B(up to 100%)Vibration:B(4 g)EMC:B(bridge and open deck)
LRENV1
KRYes
ABSYes
EACYes
TypeHub expansion module
Variant2x shielded RJ45
Cable lengthMax. 100 m between 2 stations (segment length)
Transfer rate100 Mbit/s
Physical layer100BASE-TX
Half-duplexYes
Full-duplexNo
AutonegotiationYes
Auto-MDI/MDIXYes
Hub propagation delay0.96 to 1 µs
Electrical isolationPower supply isolated from Ethernet (IF1 and IF2)
HorizontalYes
VerticalYes
0 to 2000 mNo limitations
>2000 mReduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529IP20
Horizontal mounting orientation-25 to 60°C
Vertical mounting orientation-25 to 50°C
Derating-
Starting temperatureYes, -40°C
Storage5 to 95%, non-condensing
Transport5 to 95%, non-condensing
OperationUp to 100%, condensing
SlotHub expansion for X20cBC8083 and X20cHB8880
Получить предложение по этой позиции