Beckhoff Automation GmbH & Co. KG EL2002
EL2002 EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A
Категории:
Технические характеристики
| Connection technology | 4-wire |
|---|---|
| Number of outputs | 2 |
| Напряжение питания | 24 V DC (-15%/+20%) |
| Load type | resistive, inductive, lamp load |
| Distributed clocks | â |
| Max. output current | 0.5 A (short-circuit proof) per channel |
| Reverse polarity protection | yes |
| Switching-off energy | < 150 mJ/channel |
| Switching times | typ. T ON : 60 µs, typ. T OFF : 300 µs |
| Current consumption E-bus | typ. 100 mA |
| Current consumption power contacts | typ. 15 mA + load |
| Bit width in the process image | 2 outputs |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field potential) |
| Масса | approx. 55 g |
| Operating temperature | -25â¦+60°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, DNV, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Description | The EL2002 digital output terminal connects the binary 24Â VÂ DC control signals from the automation device on to the actuators at the process level with electrical isolation. Each EtherCAT Terminal has two channels that indicate their signal state via |