Beckhoff Automation GmbH & Co. KG EL2042
EL2042 EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 x 4 A/1 x 8 A
Категории:
Технические характеристики
| Connection technology | 3-wire |
|---|---|
| Number of outputs | 2 |
| Напряжение питания | 24 V DC (-15%/+20%) |
| Load type | resistive, inductive, lamp load |
| Distributed clocks | â |
| Max. output current | 4.0 A (short-circuit proof) per channel, 8 A for parallel connection |
| Short-circuit current | typ. < 70 A |
| Reverse polarity protection | yes |
| Switching-off energy | < 1.7 J/channel |
| Switching times | typ. T ON : 40 µs, typ. T OFF : 200 µs |
| Current consumption E-bus | typ. 120 mA |
| Current consumption power contacts | typ. 15 mA + load |
| Bit width in the process image | 2 outputs |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field potential) |
| Масса | approx. 55 g |
| Operating temperature | -25â¦+60°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE |
| Description | The EL2042 digital output terminal connects binary 24Â VÂ DC control signals to the actuators with electrical isolation. Each EtherCAT Terminal contains two channels whose signal state is indicated by LEDs. The EL2042 enables connection of loads with |