Beckhoff Automation GmbH & Co. KG EL2044
EL2044 EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A, with extended diagnostics
Категории:
Технические характеристики
| Connection technology | 2-wire |
|---|---|
| Number of outputs | 4 |
| Напряжение питания | 24 V DC (-15%/+20%) |
| Load type | resistive, inductive, lamp load up to max. 24 W |
| Max. output current | max. 2 A (short-circuit proof) per channel, with diagnostic |
| Output stage | push (high-side switch) |
| Short-circuit current | typ. < 4 A |
| Reverse polarity protection | yes |
| Switching-off energy | typ. < 150 mJ/channel |
| Switching times | typ. T ON : 50 µs, typ. T OFF : 100 µs |
| Current consumption E-bus | typ. 55 mA |
| Current consumption power contacts | typ. 25 mA + load |
| Configuration | via TwinCAT System Manager |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | diagnostics via process data and LED: overtemperature, PowerFail, short circuit (per channel), open load detection |
| Масса | approx. 50 g |
| Operating temperature | 0â¦55°C |
| Storage temperature | -25â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE |
| Description | The EL2044 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal contains four channels that indicate its signal state by |