Beckhoff Automation GmbH & Co. KG EL2262
EL2262 EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling
Категории:
Технические характеристики
| Connection technology | 4-wire |
|---|---|
| Number of outputs | 2 |
| Напряжение питания | 24 V DC (-15%/+20%) |
| Load type | resistive, inductive, lamp load |
| Oversampling factor | n = integer multiple of the cycle time, 1â¦1000 |
| Timestamp accuracy | 10 ns between the channels |
| Distributed clocks | yes |
| Distributed clock accuracy | << 1 µs |
| Max. output current | 0.5 A (short-circuit proof in push operation) per channel |
| Output stage | push-pull |
| Short-circuit current | typ. < 1.5 A |
| Reverse polarity protection | yes |
| Current limitation | typ. 4 A/150 μs |
| Switching-off energy | < 150 mJ/channel |
| Switching times | typ. T ON : < 1 µs, typ. T OFF : < 1 µs |
| Output rate | max. 1 Msample/s, min. cycle 1 µs |
| Current consumption E-bus | typ. 70 mA |
| Current consumption power contacts | typ. 35 mA + load |
| Bit width in the process image | n x 2 outputs + 32 bit CycleCounter + 32 bit StartTimeNextOutput |
| Configuration | via TwinCAT System Manager |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | up to 1000 x oversampling, max. 1 Msample/s, min. output cycle 1 µs |
| Масса | approx. 60 g |
| Operating temperature | 0â¦55°C |
| Storage temperature | -25â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Description | The EL2262 digital output terminal connects the binary control output signals at the process level with electrical isolation. The outputs are controlled with an adjustable integral multiple (oversampling factor: n) of the bus cycle frequency (n |