Beckhoff Automation GmbH & Co. KG EL2612
EL2612 EtherCAT Terminal, 2-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC
Категории:
Технические характеристики
| Connection technology | relay output |
|---|---|
| Number of outputs | 2 x change-over |
| Напряжение питания | 125 V AC/30 V DC |
| Load type | resistive |
| Distributed clocks | â |
| Resistive switching current | 0.5 A AC/2 A DC per channel |
| Minimum permitted load | 10 µA at 10 mV DC with intact contact coating |
| Inductive switching current | no data |
| Lamp test, electronic ballast | â |
| Current consumption E-bus | typ. 150 mA |
| Current consumption power contacts | â |
| Bit width in the process image | 2 outputs |
| Operating cycles mech. (min.) | 1 x 10 8 |
| Operating cycles electr. (min.) | 2 x 10 5 (1Â A/30Â VÂ DC) |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | signal relay |
| Масса | approx. 50 g |
| Operating temperature | -25â¦+55°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE, UL |
| Description | The EL2612 output terminal has two relays, each featuring a change-over contact. The signal state of the EtherCAT Terminal is indicated by light emitting diodes. The EL2612 features potential-free contacts; the power contacts are not passed through. |