Beckhoff Automation GmbH & Co. KG EL2622
EL2622 EtherCAT Terminal, 2-channel relay output, 230 V AC, 30 V DC, 5 A, without power contacts
Категории:
Технические характеристики
| Connection technology | relay output |
|---|---|
| Number of outputs | 2 x make contacts |
| Напряжение питания | 230 V AC/30 V DC |
| Load type | resistive, inductive, lamp load |
| Distributed clocks | â |
| Resistive switching current | 5 A AC/DC per channel |
| Minimum permitted load | 10 mA at 5 V DC |
| Inductive switching current | 2 A AC/DC per channel |
| Lamp test, electronic ballast | 4 x 58 W |
| Current consumption E-bus | typ. 170 mA |
| Current consumption power contacts | â |
| Bit width in the process image | 2 outputs |
| Operating cycles mech. (min.) | 2 x 10 7 |
| Operating cycles electr. (min.) | 1 x 10 5 (5Â A/30Â VÂ DC) |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | â |
| Масса | approx. 50 g |
| Operating temperature | -25â¦+55°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE, UL |
| Description | The EL2622 output terminal has two relays, each with a single contact. It is universally applicable for switching mains voltage consumers. The signal state of the EtherCAT Terminal is indicated by light emitting diodes. The EL2622 features potential-free |