Beckhoff Automation GmbH & Co. KG EL2634
EL2634 EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A
Категории:
Технические характеристики
| Connection technology | relay output |
|---|---|
| Number of outputs | 4 x make contacts |
| Напряжение питания | 250 V AC/30 V DC |
| Load type | resistive, inductive |
| Distributed clocks | â |
| Resistive switching current | 4Â AÂ AC/DC per channel |
| Minimum permitted load | 0.1Â mA at 0.1Â VÂ DC (at 120 operations/min.) |
| Inductive switching current | 2 A AC/DC per channel |
| Lamp test, electronic ballast | â |
| Current consumption E-bus | 80 mA |
| Current consumption power contacts | â |
| Bit width in the process image | 4 outputs |
| Operating cycles mech. (min.) | 2 x 10 7 (at 18 x 10 3 switching cycles per hour) |
| Operating cycles electr. (min.) | 1 x 10 5 (3Â A/30Â VÂ DC resistive load) |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field potential) |
| Масса | approx. 70 g |
| Operating temperature | -25â¦+60°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE, UL |
| Description | The EL2634 output terminal has four relays, each with a single contact. The relay contact can be used up to 250Â VÂ AC or 30Â VÂ DC. The signal state of the EtherCAT Terminal is indicated by light emitting diodes. The EL2634 features potential-free contacts. |