EL3102

Beckhoff Automation GmbH & Co. KG EL3102

EL3102 EtherCAT Terminal, 2-channel analog input, voltage, ±10 V, 16 bit, differential

Категории:

Технические характеристики

Number of inputs2 (differential)
Power supplyvia the E-bus
Напряжение питания-10…+10 V
Oversampling factor–
Input signal bandwidth–
Distributed clocksyes
Distributed clock accuracy<< 1 µs
Internal resistance> 200 kΩ
Input filter cut-off frequency5 kHz
Напряжение питанияmax. 35 V (relative to the internal GND)
Conversion time~ 60 µs (fast mode ~ 40 µs)
Resolution16 bit (incl. sign)
Measurement error/uncertainty< ±0.3% (relative to full scale value)
Electrical isolation500 V (E-bus/signal voltage)
Current consumption E-bustyp. 170 mA
Current consumption power contacts–
Bit width in the process imageinputs: 8 byte
Special featuresstandard and compact process image, switchable measuring data representation, activatable FIR/IIR filters, limit value monitoring
Массаapprox. 60 g
Operating temperature-25…+60°C
Storage temperature-40…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Pluggable wiring levelfor all ESxxxx terminals
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE, CCC, UL, ATEX, IECEx, cFMus
Ex markingATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc
DescriptionThe EL3102 analog input terminal handles signals in the range between -10 and +10 V. The voltage is digitized to a resolution of 16 bits, and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EtherCAT
Получить предложение по этой позиции