Beckhoff Automation GmbH & Co. KG EL3174-0030
EL3174-0030 EtherCAT Terminal, 4-channel analog input, multi-function, ±10 V, ±20 mA, 16 bit, externally calibrated
Категории:
Технические характеристики
| Number of inputs | 4 |
|---|---|
| Ground reference (input) | voltage: differential, current: single-ended |
| Power supply | via the E-bus |
| Oversampling factor | â |
| Distributed clocks | yes |
| Distributed clock accuracy | << 1 µs |
| Internal resistance | > 200 kΩ | typ. 85 Ω |
| Input filter cut-off frequency | 5 kHz |
| Напряжение питания | max. 35 V (voltage measurement) |
| Dielectric strength | max. 30 V (current measurement) |
| Conversion time | minimum 150 µs |
| Measuring range, nominal | -10/0â¦+10 V | -20/0/+4â¦+20 mA |
| Measuring range, technical | -10.73â¦+10.73 V | -21.47â¦+21.47 mA |
| Resolution | 16 bit (incl. sign) |
| Measurement error/uncertainty | < ±0.3% (relative to full scale value) |
| Сертификация | externally calibrated |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Current consumption E-bus | typ. 180 mA |
| Current consumption power contacts | load-dependent |
| Bit width in the process image | inputs: 16 byte |
| Configuration | no address or configuration setting |
| Special features | U/I parameterizable, ExtendedRange, standard and compact process image, activatable FIR/IIR filters |
| Масса | approx. 65Â g |
| Operating temperature | 0â¦55°C |
| Storage temperature | -25â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Description | The EL3174-0030 analog input terminal has four individually parameterizable inputs. Signals in the range from -10/0 to +10Â V or -20/0/+4 to +20Â mA can be processed via each channel. Physically, the voltage and current signals should be connected to |