Beckhoff Automation GmbH & Co. KG EL3201-0030
EL3201-0030 EtherCAT Terminal, 1-channel analog input, temperature, RTD (Pt100), 16 bit, high-precision, externally calibrated
Категории:
Технические характеристики
| Number of inputs | 1 |
|---|---|
| Power supply | via the E-bus |
| Distributed clocks | â |
| Input filter cut-off frequency | typ. 1 kHz |
| Sensor type | Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (e.g. potentiometer, 10 Ωâ¦4 kΩ), KTY sensors (types see documentation) |
| Connection technology | 4-wire |
| Conversion time | approx. 24 ms default setting, 4â¦500 ms configurable |
| Measuring range | -200â¦+850°C (Pt sensors); -60â¦+250°C (Ni sensors); -200â¦+320°C (high-precision) |
| Measuring current | < 0.5 mA (load-dependent) |
| Temperature range | -200â¦+320°C (Pt sensors) |
| Resolution | 0.01°C per digit |
| Measurement error/uncertainty | < ±0.1°C at 23°C ambient temperature, 4-wire connection, Pt100 sensors (measuring range: -200â¦+320°C) and 50 Hz filter |
| Сертификация | externally calibrated |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Current consumption E-bus | typ. 190 mA |
| Current consumption power contacts | â |
| Bit width in the process image | 1 x 32 bit RTD input |
| Special features | integrated digital filter, limit value monitoring, variable connection technology, external calibration certificate |
| Масса | approx. 60 g |
| Operating temperature | -25â¦+60°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Description | The EL3201-0030 is the externally calibrated version of the EL3201-0010. The EL3201-0030 analog input terminal facilitates the direct connection of a resistance sensor. The measured resistance value can either be output directly in ohms or transformed |