EL3208-0010

Beckhoff Automation GmbH & Co. KG EL3208-0010

EL3208-0010 EtherCAT Terminal, 8-channel analog input, temperature, RTD (Pt1000, NTC), 16 bit

Категории:

Технические характеристики

Number of inputs8
Power supplyvia the E-bus
Distributed clocks–
Input filter cut-off frequencytyp. 1 kHz
Sensor typePt1000 (default), Ni1000, potentiometer 1/5/10 kΩ, NTC 1.8 k/2.2 k/3 k/5 k/10 k/20 k/100 k
Connection technology2-wire
Conversion time~ 1 s
Measuring range-50…+150°C (depending on sensor type)
Measuring current< 0.5 mA (load-dependent)
Resolution0.01°C per digit
Measurement error/uncertainty-20…+60°C: ±0.25°C at 25°C ambient temperature; -50…+150°C: ±1.5°C (for Pt/Ni sensors)
Electrical isolation500 V (E-bus/signal voltage)
Current consumption E-bustyp. 95 mA
Current consumption power contacts–
Special featuresintegrated digital filter, limit value monitoring
Массаapprox. 60 g
Operating temperature-25…+60°C
Storage temperature-40…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE, UL
DescriptionThe EL3208-0010 analog input terminal facilitates the direct connection of eight resistance sensors over a width of 12 mm (high-density housing). The measured resistance value can either be output directly in ohms or transformed into a temperature. If
Получить предложение по этой позиции