EL3214

Beckhoff Automation GmbH & Co. KG EL3214

EL3214 EtherCAT Terminal, 4-channel analog input, temperature, RTD (Pt100), 16 bit, 3-wire connection

Категории:

Технические характеристики

Number of inputs4
Ground reference (input)single-ended
Power supplyvia the E-bus
Distributed clocks–
Input filter cut-off frequencytyp. 1 kHz
Sensor typePt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (e.g. potentiometer, 10 Ω…4 kΩ), KTY sensors (types see documentation)
Connection technology2- or 3-wire (default: 3-wire)
Conversion timeapprox. 170 ms default setting
Measuring range-200…+850°C (Pt sensors); -60…+250°C (Ni sensors)
Measuring current< 0.5 mA (load-dependent)
Temperature range-200…+850°C (Pt sensors); -60…+250°C (Ni sensors)
Resolution0.1°C per digit
Measurement error/uncertainty< ±0.5°C for Pt sensors, 4 x 3-wire connection
Electrical isolation500 V (E-bus/signal voltage)
Current consumption E-bustyp. 140 mA
Current consumption power contacts–
Special featuresintegrated digital filter, limit value monitoring, variable connection technology
Массаapprox. 60 g
Operating temperature-25…+60°C
Storage temperature-40…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE, UL, DNV
DescriptionThe EL3214 analog input terminal facilitates the direct connection of four resistance sensors using 3-wire technology over a width of 12 mm (high-density housing). The measured resistance value can either be output directly in ohms or transformed into a
Получить предложение по этой позиции