EL6688

Beckhoff Automation GmbH & Co. KG EL6688

EL6688 EtherCAT Terminal, 1-port communication interface, IEEE 1588/PTP, master/slave

Категории:

Технические характеристики

Number of ports1
Bus systemEthernet (IEEE 802.3)
Ethernet interface10BASE-T/100BASE-TX Ethernet with 1 x RJ45
Transmission rate10/100 Mbit/s, IEEE 802.3u auto-negotiation, half or full duplex at 10 and 100 Mbit/s possible, automatic settings
Cable lengthup to 100 m twisted pair
Hardware diagnosticsstatus LEDs
Power supplyvia the E-bus
Distributed clocksyes
Electrical isolation500 V (E-bus/Ethernet)
ProtocolPTPv1 (IEEE 1588-2002), PTPv2 (IEEE 1588-2008)
Configurationno
Current consumption power contacts–
Current consumption E-bustyp. 310 mA
Special featuresusable in TwinCAT as a reference clock
Массаapprox. 75 g
Operating temperature0…55°C
Storage temperature-25…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE, CCC, UL, ATEX, IECEx, cFMus
Ex markingATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc
DescriptionThe EL6688 EtherCAT Terminal presents itself as a device in the IEEE 1588 synchronization system with support for PTPv1 (IEEE 1588-2002) and PTPv2 (IEEE 1588-2008) based on Ethernet. On the one hand, the EL6688 is an IEEE 1588 clock (master or slave)
Получить предложение по этой позиции