Beckhoff Automation GmbH & Co. KG EL6851-0010
EL6851-0010 EtherCAT Terminal, 1-channel communication interface, DMX, slave
Категории:
Технические характеристики
| Technology | DMX slave terminal |
|---|---|
| Number of devices | â |
| Data transfer channels | RS485 physics/half duplex |
| Transmission rate | 250 kbit, one start bit, two stop bits |
| Interfaces | RS485, termination resistor can be switched, half duplex |
| Cable impedance | 120 Ω |
| Power supply | via the E-bus |
| Distributed clocks | â |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Protocol | DMX512 |
| Bit width in the process image | variable |
| Configuration | no address setting, configuration via PLC |
| Current consumption power contacts | â |
| Current consumption E-bus | typ. 130 mA |
| Special features | start address and data length can be set |
| Масса | approx. 55 g |
| Operating temperature | -25â¦+60°C |
| Storage temperature | -40â¦+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Description | The EL6851-0010 EtherCAT Terminal is a DMX slave terminal. The DMX slave terminal can receive up to 512Â bytes of data. The start address and the data length can be set via the CoE (CAN application protocol over EtherCAT) objects. The RS485 interface in |