EL6851

Beckhoff Automation GmbH & Co. KG EL6851

EL6851 EtherCAT Terminal, 1-channel communication interface, DMX, master

Категории:

Технические характеристики

TechnologyDMX master terminal
Number of devicesmax. 32 without repeater
Data transfer channelsRS485 physics/half duplex
Transmission rate250 kbit, one start bit, two stop bits
InterfacesRS485, termination resistor can be switched, half duplex
Cable impedance120 Ω
Power supplyvia the E-bus
Distributed clocks–
Electrical isolation500 V (E-bus/signal voltage)
ProtocolDMX512
Bit width in the process imagevariable
Configurationno address setting, configuration via PLC
Current consumption power contacts–
Current consumption E-bustyp. 130 mA
Special featuressupports RDM protocol, library available; electrically isolated
Массаapprox. 55 g
Operating temperature-25…+60°C
Storage temperature-40…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE, CCC, UL, ATEX, IECEx, cFMus
Ex markingATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc
DescriptionThe EL6851 EtherCAT Terminal is a DMX master terminal and enables connection of up to 32 devices without repeater. The DMX master terminal can send up to 512 bytes of data (this can be set via the terminal). At 250 kbit/s a maximum data rate of 44 kHz is
Получить предложение по этой позиции