Bürkert Fluid Control Systems 20088333
Positioner top basic 70 mm for act. 230X
Технические характеристики
| Type | 8694 |
|---|---|
| Product sub-group | Positioner / Process Controller |
| Function | Positioner |
| Manual actuation | Yes |
| Pneumatic function 1 double acting | No |
| Pneumatic function 1 single acting | Yes |
| Valve diameter | 0,6 mm |
| QNn value (gas) | 7 l/min |
| Temperature environment min | -10 °C |
| Temperature environment max | 60 °C |
| Displacement transducer type | internal linear |
| Displacement transducer signal | digital 14-bit |
| Positioning system with booster function | No |
| For Actuator size 40 mm | No |
| For Actuator size 50mm | No |
| For Actuator size 63mm | No |
| For Actuator size 70mm | Yes |
| For Actuator size 80mm | No |
| For Actuator size 90mm | Yes |
| For Actuator size 100mm | No |
| For Actuator size 125mm | No |
| For Actuator size 130mm | No |
| For Actuator size 175mm | No |
| For Actuator size 225mm | No |
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1/8 |
| Electrical connection sort | Plug - M12 |
| Electrical connection type | male |
| Материал | Stainless steel |
| Напряжение питания | 29,5 V |
| Напряжение питания | 31,6 V |
| Supply system-internal | No |
| Supply via BUS | Yes |
| Supply via separating barrier | No |
| Galvanically separated actuator supply | No |
| Напряжение питания | No |
| Напряжение питания | Yes |
| Input 1 type digital | serial (bus) |
| Output 1 type digital | Serial (bus) |
| Communication interface protocol | ASi + Service-büS |
| Control interface | DIP switch |
| Mounting type | ELEMENT drive |
| Protection type IP (max. with suitable connector) | IP65/67 |
| Масса | 0,510 kg |
| Approval type | UL |
| Сертификация | UL Listed cULus |