ebm-papst Mulfingen GmbH & Co. KG A4D500-AM03-35
AC axial fan - HyBlade
Категории:
Технические характеристики
| Масса | 9,44 kg |
|---|---|
| Motor size | 110 |
| Size | 500 mm |
| Rotor surface | Painted black |
| Материал | PP plastic |
| Материал | Press-fitted, painted sheet steel blank, sprayed with PP plastic |
| Number of blades | 5 |
| Airflow direction | A |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Рабочая температура | Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class | H2+A |
| Max. permitted ambient temp. for motor (transport/storage) | +80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | -40 °C |
| Installation position | Shaft horizontal or rotor on top; rotor on bottom on request |
| Condensation drainage holes | On stator side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Terminal box |
| Motor protection | Thermal switch auto reset, lead out, with basic insulation |
| with cable | Axial |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60034-1 (2010) / CE |
| Approval | VDE / EAC |
| Phase | 3~ / 3~ / 3~ |
| Напряжение питания | AC / AC / AC |
| Напряжение питания | 400 / 400 / 460 V |
| Connection | D / Y / D |
| Frequency | 50 / 50 / 60 Hz |
| Type of data definition | maximum load / maximum load / maximum load |
| Valid for approval / standard | CE / CE / CE |
| Speed | 1390 / 1180 / 1640 min-1 |
| Power input | 720 / 550 / 1060 W |
| Current draw | 1,41 / 0,9 / 1,64 A |
| Starting current | 6,5 / 2,2 / 6,8 A |
| Max. back pressure | 140 / 100 / 138 Pa |
| Рабочая температура | -40 / -40 / -40 °C |