ebm-papst Mulfingen GmbH & Co. KG A4E500-AM03-35
AC axial fan - HyBlade
Категории:
Технические характеристики
| Масса | 9,72 kg |
|---|---|
| Motor size | 110 |
| Size | 500 mm |
| Rotor surface | Painted black |
| Материал | PP plastic |
| Материал | Press-fitted, painted sheet steel blank, sprayed with PP plastic |
| Number of blades | 5 |
| Airflow direction | A |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Рабочая температура | Occasional start-up between -40°C and -25°C is permissible.|For continuous operation at temperatures below -25°C (e.g. refrigeration applications) we recommend our fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class | H2+A |
| Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Shaft horizontal or rotor on top; rotor on bottom on request |
| Condensation drainage holes | On stator side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Terminal box / Via terminal box, capacitor integrated and connected |
| Motor protection | Thermal switch auto reset, lead out, with basic insulation |
| with cable | Axial |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Motor capacitor according to EN 60252-1 in safety protection class | S0 |
| Conformity with standards | EN 61800-5-1; EN 60034-1 (2010) / CE |
| Approval | CSA C22.2 No. 100 / EAC / VDE / UL 1004-1 |
| Phase | 1~ / 1~ |
| Напряжение питания | AC / AC |
| Напряжение питания | 230 / 230 V |
| Frequency | 50 / 60 Hz |
| Type of data definition | maximum load / maximum load |
| Valid for approval / standard | CE / CE |
| Speed | 1300 / 1400 min-1 |
| Power input | 680 / 880 W |
| Current draw | 3 / 3,88 A |
| Starting current | 6,65 / 6 A |
| Motor capacitor | 12 / 12 µF |
| Напряжение питания | 450 / 450 V |
| Capacitor standard | S0 / S0 |
| Max. back pressure | 150 / 100 Pa |
| Рабочая температура | -40 / -40 °C |