ebm-papst Mulfingen GmbH & Co. KG D1G146-LV03-01
EC centrifugal fan
Категории:
Технические характеристики
| Масса | 2,44 kg |
|---|---|
| Motor size | 55 |
| Size | 146 mm |
| Rotor surface | Thick-film passivated |
| Материал | PP plastic |
| Материал | Sheet steel, galvanized |
| Материал | PP plastic |
| Motor suspension | Motor vibration-damped on both sides |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP20 |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H0 - dry environment |
| Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Any |
| Condensation drainage holes | None, open rotor |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Tach output - Motor current limitation - Soft start - PWM control input - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for motor |
| EMC immunity to interference | According to EN 61000-6-2 (industrial environment) |
| EMC interference emission | According to EN 61000-6-4 (industrial environment) |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Thermal switch auto reset, internally connected |
| Protection class assignment | 0; The built-in component has basic insulation in the basic design and has several local protection class assignments.|The protection class assignment is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 230 V |
| Напряжение питания | 200 .. 240 V |
| Frequency | 50/60 Hz |
| Type of data definition | maximum load |
| Speed | 1840 min-1 |
| Power input | 165 W |
| Current draw | 1,2 A |
| Min. back pressure | 115 Pa |
| Рабочая температура | 50 °C |