D3G133-LV13-30

ebm-papst Mulfingen GmbH & Co. KG D3G133-LV13-30

EC centrifugal fan

Категории:

Технические характеристики

Масса2,6 kg
Motor size55
Size133 mm
МатериалPP plastic
МатериалSheet steel, galvanized
МатериалPP plastic
Motor suspensionMotor vibration-damped on both sides
Direction of rotationCounterclockwise, viewed toward rotor
Degree of protectionMotor IP00, electronics IP20
Insulation class"F"
Moisture (F) / Environmental (H) protection classH0 - dry environment
Max. permitted ambient temp. for motor (transport/storage)+ 80 °C
Min. permitted ambient temp. for motor (transport/storage)- 40 °C
Installation positionAny
Condensation drainage holesNone, open rotor
Cooling hole/openingOn rotor and stator sides
ModeS1
Motor bearingBall bearing
Technical features- Output 10 VDC, max. 1.1 mA - Tach output - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for motor
EMC immunity to interferenceAccording to EN 61000-6-2 (industrial environment)
EMC interference emissionAccording to EN 61000-6-4 (industrial environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system)<= 3,5 mA
Electrical hookupPlug
Motor protectionThermal switch auto reset, internally connected
with cableVariable
Protection class assignmentI; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation.
Conformity with standardsEN 60335-1 / CE
Comment on CEEcodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W.
ApprovalUL 1004-7 + 60730-1 / CSA C22.2 No. 77 + CAN/CSA-E60730-1
Phase1~
Напряжение питанияAC
Напряжение питания230 V
Напряжение питания200 .. 240 V
Frequency50/60 Hz
Type of data definitionrunning at free air
Speed2100 min-1
Power input170 W
Current draw1,4 A
Рабочая температура60 °C
Получить предложение по этой позиции