ebm-papst Mulfingen GmbH & Co. KG D3G146-LV05-31
EC centrifugal fan
Категории:
Технические характеристики
| Масса | 2,72 kg |
|---|---|
| Motor size | 55 |
| Size | 146 mm |
| Rotor surface | Galvanized |
| Материал | PP plastic |
| Материал | Sheet steel, galvanized |
| Материал | PP plastic |
| Motor suspension | Motor vibration-damped on both sides |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | Motor IP00, electronics IP20 |
| Insulation class | "F" |
| Moisture (F) / Environmental (H) protection class | H0 - dry environment |
| Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Any |
| Cooling hole/opening | On rotor and stator sides |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Output 10 VDC, max. 10 mA - Tach output - Motor current limitation - PFC, active - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for motor |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Plug |
| Motor protection | Thermal switch auto reset, internally connected |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Approval | CSA C22.2 No. 77 + CAN/CSA-E60730-1 / UL 1004-7 + 60730-1 |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 230 V |
| Напряжение питания | 200 .. 240 V |
| Frequency | 50/60 Hz |
| Type of data definition | running at free air |
| Speed | 1560 min-1 |
| Power input | 170 W |
| Current draw | 0,8 A |
| Min. back pressure | 0 Pa |
| Рабочая температура | 60 °C |