ebm-papst Mulfingen GmbH & Co. KG K3G133-LR15-01
EC centrifugal fan combination
Категории:
Технические характеристики
| Масса | 3,3 kg |
|---|---|
| Motor size | 55 |
| Size | 133 mm |
| Rotor surface | Thick-film passivated |
| Материал | PP plastic |
| Материал | PA plastic |
| Материал | PP plastic |
| Motor suspension | Motor vibration-damped on both sides |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | Motor IP44, electronics IP20 / installation- and position-dependent |
| Insulation class | "F" |
| Moisture (F) / Environmental (H) protection class | H0+ |
| Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Any |
| Condensation drainage holes | None, open rotor |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Output 10 VDC, max. 1.1 mA - Tach output - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for motor |
| EMC immunity to interference | According to EN 61000-6-2 (industrial environment) |
| EMC circuit feedback | According to EN 61000-3-2/3 |
| EMC interference emission | According to EN 61000-6-3 (household environment) |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Connector with cable |
| Motor protection | Thermal switch auto reset, internally connected |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Comment on CE | Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W. |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 230 V |
| Напряжение питания | 200 .. 240 V |
| Frequency | 50/60 Hz |
| Type of data definition | maximum load |
| Speed | 1280 min-1 |
| Power input | 69 W |
| Current draw | 0,56 A |
| Min. back pressure | 40 Pa |
| Рабочая температура | -25 °C |
| Рабочая температура | 50 °C |