K3G250-RD17-03

ebm-papst Mulfingen GmbH & Co. KG K3G250-RD17-03

EC centrifugal module - RadiCal

Категории:

Технические характеристики

Масса2,3 kg
Motor size55
Size250 mm
Rotor surfaceThick-film passivated
МатериалPA plastic
МатериалPA plastic
Number of blades7
Direction of rotationClockwise, viewed toward rotor
Degree of protectionIP54
Insulation class"B"
Moisture (F) / Environmental (H) protection classH1
Max. permitted ambient temp. for motor (transport/storage)+ 80 °C
Min. permitted ambient temp. for motor (transport/storage)- 40 °C
Installation positionAny
Condensation drainage holesNone, open rotor
ModeS1
Motor bearingBall bearing
Technical features- Output 10 VDC, max. 1.1 mA - Tach output - Power limiter - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Overvoltage detection - Thermal overload protection for electronics/motor - Line undervoltage detection
EMC immunity to interferenceAccording to EN 61000-6-2 (industrial environment)
EMC circuit feedbackAccording to EN 61000-3-2/3
EMC interference emissionAccording to EN 55022 (class B, household environment), the application may require ferritic damping in the cable due to the conditions of installation.
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system)<= 3,5 mA
Motor protectionElectronic motor protection
with cableVariable
Protection class assignmentI; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation.
Conformity with standardsEN 60335-1 / CE
Comment on CEEcodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W.
ApprovalCCC / CSA C22.2 No. 77 + CAN/CSA-E60730-1 / UL 1004-7 + 60730-1
Phase1~
Напряжение питанияAC
Напряжение питания230 V
Напряжение питания200 .. 240 V
Frequency50/60 Hz
Type of data definitionmaximum load
Speed1955 min-1
Power input80 W
Current draw0,7 A
Рабочая температура-25 °C
Рабочая температура60 °C
Получить предложение по этой позиции