ebm-papst Mulfingen GmbH & Co. KG R3G310-FD02-01
EC centrifugal fan - RadiCal
Категории:
Технические характеристики
| Масса | 2,96 kg |
|---|---|
| Motor size | 74 |
| Size | 310 mm |
| Rotor surface | Galvanized |
| Материал | PP plastic |
| Number of blades | 6 |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H1 |
| Max. permitted ambient temp. for motor (transport/storage) | +80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | -40 °C |
| Installation position | Any |
| Condensation drainage holes | None, open rotor |
| Cooling hole/opening | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Technical features | - Output 10 VDC, max. 10 mA - Tach output - Power limiter - Motor current limitation - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Overvoltage detection - Thermal overload protection for electronics/motor - Line undervoltage detection |
| EMC immunity to interference | According to EN 61000-6-2 (industrial environment) |
| EMC interference emission | According to EN 61000-6-4 (industrial environment) |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Electronic motor protection |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 230 V |
| Напряжение питания | 200 .. 240 V |
| Frequency | 50/60 Hz |
| Type of data definition | maximum load |
| Speed | 1650 min-1 |
| Power input | 170 W |
| Current draw | 1,5 A |
| Рабочая температура | 60 °C |