ebm-papst Mulfingen GmbH & Co. KG R6D630-FA07-01
AC centrifugal fan - RadiCal
Категории:
Технические характеристики
| Motor size | 138 |
|---|---|
| Size | 630 mm |
| Rotor surface | Cast in aluminum |
| Материал | PP plastic |
| Number of blades | 6 |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Рабочая температура | Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class | H2 |
| Max. permitted ambient temp. for motor (transport/storage) | +80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | -40 °C |
| Installation position | Any |
| Condensation drainage holes | On rotor and stator sides |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Thermal switch auto reset, lead out, with basic insulation |
| with cable | Lateral |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60034-1 (2010) / CE |
| Approval | VDE / EAC |
| Phase | 3~ / 3~ / 3~ / 3~ |
| Напряжение питания | AC / AC / AC / AC |
| Напряжение питания | 230 / 230 / 400 / 400 V |
| Connection | D / D / Y / Y |
| Frequency | 50 / 60 / 50 / 60 Hz |
| Type of data definition | maximum load / maximum load / maximum load / maximum load |
| Valid for approval / standard | CE / CE / CE / CE |
| Speed | 875 / 930 / 875 / 930 min-1 |
| Power input | 1015 / 1430 / 1015 / 1430 W |
| Current draw | 3,6 / 4,7 / 2,1 / 2,7 A |
| Starting current | 12 / 10,5 / 6,9 / 6,1 A |
| Min. back pressure | 0 / 0 / 0 / 0 Pa |