ebm-papst Mulfingen GmbH & Co. KG S1G305-DA02-10
EC axial fan - HyBlade
Категории:
Технические характеристики
| Масса | 1,66 kg |
|---|---|
| Motor size | 55 |
| Size | 305 mm |
| Rotor surface | Cast in PP plastic |
| Материал | PP plastic |
| Number of blades | 5 |
| Airflow direction | A |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H1+ |
| Max. permitted ambient temp. for motor (transport/storage) | + 70 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Shaft horizontal |
| Condensation drainage holes | None |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Technical features | - Motor current limitation - Soft start - Thermal overload protection for motor |
| Speed levels | 10 |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Connector with cable |
| Motor protection | Locked-rotor protection |
| with cable | Variable |
| Protection class assignment | II; The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Comment on CE | Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W. |
| Approval | UL 1004-7 + 60730-1 / CSA C22.2 No. 77 + CAN/CSA-E60730-1 / EAC |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 115 V |
| Напряжение питания | 100 .. 240 V |
| Frequency | 50/60 Hz |
| Type of data definition | maximum load |
| Speed | 1650 min-1 |
| Power input | 70 W |
| Current draw | 1,25 A |
| Max. back pressure | 75 Pa |
| Рабочая температура | 40 °C |