ebm-papst Mulfingen GmbH & Co. KG S1G315-AP01-50
EC axial fan - HyBlade
Категории:
Технические характеристики
| Масса | 2,66 kg |
|---|---|
| Motor size | 55 |
| Size | 315 mm |
| Rotor surface | Thick-film passivated |
| Материал | PP plastic |
| Материал | Press-fitted sheet steel blank, sprayed with PP plastic |
| Материал | Steel, coated with black plastic (RAL 9005) |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H1 |
| Max. permitted ambient temp. for motor (transport/storage) | + 70 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Any |
| Condensation drainage holes | None, open rotor |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Technical features | - Speed setting input (230 V) - Power limiter - Motor current limitation - Soft start - Thermal overload protection for motor |
| Speed levels | 2 |
| EMC immunity to interference | According to EN 61000-6-2 (industrial environment) |
| EMC circuit feedback | According to EN 61000-3-2/3 |
| EMC interference emission | According to EN 61000-6-3 (household environment) |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 0,25 mA |
| Electrical hookup | Terminal box |
| Motor protection | Thermal switch auto reset, internally connected |
| with cable | Lateral |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60034-1; EN 60204-1; EN 60335-1 / CE |
| Comment on CE | Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W. |
| Phase | 1~ / 1~ |
| Напряжение питания | AC / AC |
| Напряжение питания | 230 / 230 V |
| Напряжение питания | 200 .. 240 / 200 .. 240 V |
| Frequency | 50/60 / 50/60 Hz |
| Type of data definition | - / maximum load |
| Speed | 1000 / 1350 min-1 |
| Power input | 80 W |
| Current draw | 0,7 A |
| Max. back pressure | 45 Pa |
| Рабочая температура | -40 / -40 °C |
| Рабочая температура | 40 / 40 °C |