ebm-papst Mulfingen GmbH & Co. KG S4E450-ZK04-01
AC axial fan - AxiEco
Категории:
Технические характеристики
| Масса | 11,68 kg |
|---|---|
| Motor size | 94 |
| Size | 450 mm |
| Rotor surface | Painted black |
| Материал | PP plastic |
| Материал | PP plastic, galvanized sheet-metal plate |
| Материал | Steel, coated with black plastic (RAL 9005) |
| Number of blades | 5 |
| Airflow direction | V |
| Direction of rotation | Clockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Рабочая температура | Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class | H2 |
| Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Shaft horizontal or rotor on bottom; rotor on top on request |
| Condensation drainage holes | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Electrical hookup | Terminal box / Capacitor integrated and connected |
| Motor protection | Thermal switch auto reset, lead out, with basic insulation |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Motor capacitor according to EN 60252-1 in safety protection class | S0 |
| Conformity with standards | EN 60034-1 / CE |
| Approval | UL 1004-1 / EAC / CSA C22.2 No. 100 |
| Phase | 1~ / 1~ |
| Напряжение питания | AC / AC |
| Напряжение питания | 230 / 230 V |
| Frequency | 50 / 60 Hz |
| Type of data definition | maximum load / maximum load |
| Valid for approval / standard | CE / CE |
| Speed | 1380 / 1530 min-1 |
| Power input | 550 / 800 W |
| Current draw | 2,6 / 3,5 A |
| Motor capacitor | 14 / 14 µF |
| Напряжение питания | 400 / 400 V |
| Capacitor standard | S0 / S0 |
| Max. back pressure | 190 / 175 Pa |