ebm-papst Mulfingen GmbH & Co. KG W3G350-WN01-30
EC axial fan - AxiCool
Категории:
Технические характеристики
| Масса | 5,4 kg |
|---|---|
| Motor size | 74 |
| Size | 350 mm |
| Rotor surface | Thick-film passivated |
| Материал | Press-fitted sheet steel blank, sprayed with PP plastic |
| Материал | PP plastic |
| Number of blades | 5 |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H1 |
| Max. permitted ambient temp. for motor (transport/storage) | + 70 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Any |
| Condensation drainage holes | None, open rotor |
| Cooling hole/opening | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Technical features | - Speed setting input (230 V) - Power limiter - Motor current limitation - Soft start - Thermal overload protection for motor |
| Speed levels | 2 |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Electronic motor protection |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Approval | CCC |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 230 V |
| Напряжение питания | 200 .. 240 V |
| Frequency | 50/60 Hz |
| Type of data definition | maximum load |
| Speed | 1475 min-1 |
| Power input | 165 W |
| Current draw | 1,35 A |
| Max. back pressure | 85 Pa |
| Рабочая температура | -40 °C |
| Рабочая температура | 40 °C |