ebm-papst Mulfingen GmbH & Co. KG W3G450-TC28-30
EC axial fan - AxiCool
Категории:
Технические характеристики
| Масса | 11 kg |
|---|---|
| Motor size | 84 |
| Size | 450 mm |
| Rotor surface | Painted black |
| Материал | Press-fitted sheet steel blank, sprayed with PP plastic |
| Материал | PP plastic |
| Number of blades | 5 |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H2 |
| Max. permitted ambient temp. for motor (transport/storage) | + 70 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Shaft horizontal or rotor on bottom; rotor on top on request |
| Condensation drainage holes | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Technical features | - Output 10 VDC, max. 1.1 mA - Motor current limitation - PFC, passive - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage detection |
| EMC immunity to interference | According to EN 61000-6-2 (industrial environment) |
| EMC circuit feedback | According to EN 61000-3-2/3 |
| EMC interference emission | According to EN 61000-6-3 (household environment) |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Thermal switch auto reset, internally connected |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Approval | CCC |
| Phase | 1~ |
| Напряжение питания | AC |
| Напряжение питания | 230 V |
| Frequency | 50/60 Hz |
| Type of data definition | maximum load |
| Speed | 1300 min-1 |
| Power input | 345 W |
| Current draw | 2,2 A |
| Max. back pressure | 125 Pa |
| Рабочая температура | -25 °C |
| Рабочая температура | 40 °C |