ebm-papst Mulfingen GmbH & Co. KG W4D450-JA18-40

AC axial fan - AxiCool

Бренд: ebm-papst Mulfingen GmbH & Co. KG
Артикул (MPN): W4D450-JA18-40
Статус производства: Не определён

Категории:

Вентиляторы и вентиляционное оборудование

Технические характеристики

Масса	11,96 kg
Motor size	94
Size	450 mm
Rotor surface	Painted black
Материал	Sheet steel, painted black
Материал	PP plastic
Материал	Steel, coated with black plastic (RAL 9005)
Number of blades	5
Airflow direction	V
Direction of rotation	Counterclockwise, viewed toward rotor
Degree of protection	IP22
Insulation class	"F"
Рабочая температура	As fan only suitable for use with industrial evaporators
Moisture (F) / Environmental (H) protection class	H1
Max. permitted ambient temp. for motor (transport/storage)	+ 70 °C
Min. permitted ambient temp. for motor (transport/storage)	- 40 °C
Installation position	Shaft horizontal or rotor on bottom
Condensation drainage holes	On rotor side
Mode	S1
Motor bearing	Ball bearing with low-temperature lubricant
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system)	<= 3,5 mA
Motor protection	Thermal switch auto reset, lead out, with basic insulation
Protection class assignment	I; If a protective earth is connected.\|The built-in component has several local protection class assignments.\|The final protection class is determined by the intended installation.
Conformity with standards	EN 60034-1 (2010)
Approval	EAC
Phase	3~ / 3~ / 3~ / 3~
Напряжение питания	AC / AC / AC / AC
Напряжение питания	230 / 230 / 400 / 400 V
Connection	D / D / Y / Y
Frequency	50 / 60 / 50 / 60 Hz
Type of data definition	maximum load / maximum load / maximum load / maximum load
Valid for approval / standard	CE / CE / CE / CE
Speed	1300 / 1380 / 1300 / 1380 min-1
Power input	450 / 590 / 450 / 590 W
Current draw	1,39 / 1,7 / 0,8 / 1 A
Starting current	4,85 / 4,35 / 2,8 / 2,5 A
Max. back pressure	135 / 130 / 130 / 130 Pa
Рабочая температура	-40 / -40 / -40 / -40 °C

Получить предложение по этой позиции