ebm-papst Mulfingen GmbH & Co. KG W4E300-TS72-30
AC axial fan - AxiCool
Категории:
Технические характеристики
| Масса | 3,1 kg |
|---|---|
| Motor size | 68 |
| Size | 300 mm |
| Rotor surface | Painted black |
| Материал | Press-fitted sheet steel blank, sprayed with PP plastic |
| Материал | PP plastic |
| Материал | Steel, coated with black plastic (RAL 9005) |
| Number of blades | 5 |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP44 / installation- and position-dependent |
| Insulation class | "B" |
| Moisture (F) / Environmental (H) protection class | H1 |
| Max. permitted ambient temp. for motor (transport/storage) | + 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Any |
| Condensation drainage holes | None |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | < 0,75 mA |
| Motor protection | Thermal switch auto reset, internally connected |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / CE |
| Comment on CE | Ecodesign Directive 2009/125/EC + Fan Directive (EC) No. 327/2011 does not apply, as power consumption <125W. |
| Approval | CCC |
| Phase | 1~ / 1~ |
| Напряжение питания | AC / AC |
| Напряжение питания | 230 / 230 V |
| Frequency | 50 / 60 Hz |
| Type of data definition | maximum load / maximum load |
| Valid for approval / standard | CE / CE |
| Speed | 1320 / 1500 min-1 |
| Power input | 72 / 90 W |
| Current draw | 0,32 / 0,4 A |
| Starting current | 0,6 / 0,57 A |
| Motor capacitor | 2 / 2 µF |
| Напряжение питания | 400 / 400 V |
| Capacitor standard | S0 / S0 |
| Max. back pressure | 45 / 55 Pa |
| Рабочая температура | -40 / -40 °C |