ebm-papst Mulfingen GmbH & Co. KG W4E450-NL05-04
AC axial fan - AxiCool
Категории:
Технические характеристики
| Масса | 14,46 kg |
|---|---|
| Motor size | 94 |
| Size | 450 mm |
| Материал | Press-fitted sheet steel blank, sprayed with PP plastic |
| Материал | PP plastic, white |
| Материал | Steel, coated with pure-white plastic (RAL 9010) |
| Number of blades | 5 |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Рабочая температура | Occasional start-up at temperatures between -40°C and -25°C is permitted. For continuous operation at ambient temperatures below -25°C (such as refrigeration applications), use must be made of a fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class | H2 |
| Max. permitted ambient temp. for motor (transport/storage) | +80 °C |
| Min. permitted ambient temp. for motor (transport/storage) | -40 °C |
| Installation position | Shaft horizontal or rotor on bottom; rotor on top on request |
| Condensation drainage holes | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Thermal switch auto reset, lead out, with basic insulation |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Motor capacitor according to EN 60252-1 in safety protection class | S0 |
| Conformity with standards | EN 60034-1 (2010) |
| Approval | CSA C22.2 No. 100 / EAC / UL 1004-1 |
| Phase | 1~ / 1~ |
| Напряжение питания | AC / AC |
| Напряжение питания | 230 / 230 V |
| Frequency | 50 / 60 Hz |
| Type of data definition | running at free air / running at free air |
| Valid for approval / standard | - / - |
| Speed | 1400 / 1600 min-1 |
| Power input | 315 / 460 W |
| Current draw | 1,6 / 2,1 A |
| Starting current | 5,5 / 5,1 A |
| Motor capacitor | 7 / 7 µF |
| Напряжение питания | 400 / 400 V |
| Capacitor standard | S0 / S0 |
| Max. back pressure | 100 / 115 Pa |