ebm-papst Mulfingen GmbH & Co. KG W4E450-SP01-30
AC axial fan - AxiCool
Категории:
Технические характеристики
| Масса | 10,8 kg |
|---|---|
| Motor size | 74 |
| Size | 450 mm |
| Rotor surface | Painted black |
| Материал | Sheet steel, painted black |
| Материал | PP plastic |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP44 / installation- and position-dependent as per EN 60034-5 |
| Insulation class | "F" |
| Moisture (F) / Environmental (H) protection class | H1 |
| Max. permitted ambient temp. for motor (transport/storage) | + 70 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | Shaft horizontal or rotor on bottom; rotor on top on request |
| Condensation drainage holes | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | < 0,75 mA |
| Motor protection | Thermal switch auto reset, internally connected |
| with cable | Variable |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60335-1 / UKCA / CE |
| Approval | EAC / CCC |
| Phase | 1~ / 1~ |
| Напряжение питания | AC / AC |
| Напряжение питания | 230 / 230 V |
| Frequency | 50 / 60 Hz |
| Type of data definition | maximum load / maximum load |
| Valid for approval / standard | CE / CE |
| Speed | 1340 / 1540 min-1 |
| Power input | 300 / 370 W |
| Current draw | 1,32 / 1,62 A |
| Starting current | 3 / 2,9 A |
| Motor capacitor | 8 / 8 µF |
| Напряжение питания | 400 / 400 V |
| Capacitor standard | S0 / S0 |
| Max. back pressure | 70 / 35 Pa |
| Рабочая температура | -40 / -40 °C |