ebm-papst Mulfingen GmbH & Co. KG W8D630-KN01-11
AC axial fan - AxiCool
Категории:
Технические характеристики
| Масса | 21,24 kg |
|---|---|
| Motor size | 110 |
| Size | 630 mm |
| Rotor surface | Painted black |
| Материал | PP plastic |
| Материал | Press-fitted sheet steel blank, sprayed with PP plastic |
| Материал | PP plastic |
| Материал | PP plastic |
| Материал | Steel, coated with black plastic (RAL 9005) |
| Number of blades | 5 |
| Airflow direction | V |
| Direction of rotation | Counterclockwise, viewed toward rotor |
| Degree of protection | IP54 |
| Insulation class | "F" |
| Рабочая температура | If there is a risk of ice formation, the fan is only to be operated with a heating tape in the fan housing. For more detailed information, consult ebm-papst. As a fan for use with industrial evaporators, suitable for ambient temperatures between -40°C and +20°C, occasional start-up at up to +40°C permissible. |
| Moisture (F) / Environmental (H) protection class | H2 |
| Max. permitted ambient temp. for motor (transport/storage) | + 70 °C |
| Min. permitted ambient temp. for motor (transport/storage) | - 40 °C |
| Installation position | See fitting instructions |
| Condensation drainage holes | On rotor side |
| Mode | S1 |
| Motor bearing | Ball bearing with low-temperature lubricant |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) | <= 3,5 mA |
| Motor protection | Thermal switch auto reset, lead out, with basic insulation |
| Protection class assignment | I; If a protective earth is connected.|The built-in component has several local protection class assignments.|The final protection class is determined by the intended installation. |
| Conformity with standards | EN 60034-1; EN 61800-5-1 / CE |
| Approval | EAC / VDE |
| Phase | 3~ / 3~ / 3~ |
| Напряжение питания | AC / AC / AC |
| Напряжение питания | 400 / 400 / 480 V |
| Connection | D / D / D |
| Frequency | 50 / 60 / 60 Hz |
| Type of data definition | maximum load / maximum load / maximum load |
| Valid for approval / standard | CE / CE / CE |
| Speed | 670 / 730 / 780 min-1 |
| Power input | 305 / 390 / 460 W |
| Current draw | 0,85 / 0,85 / 0,9 A |
| Max. back pressure | 70 / 80 / 90 Pa |
| Рабочая температура | -40 / -40 / -40 °C |