EUCHNER GmbH + Co. KG CES-AP-C01-CH-SB-106798
CES-AP-C01-CH-SB-106798
Технические характеристики
| Repeat accuracy R | 10 % |
|---|---|
| Напряжение питания | 0.25 ... 8 A |
| Напряжение питания | 75 V (Tested by the employers’ liability insurance association up to 75 V.) |
| Напряжение питания | 1.5 kV |
| U B | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| Safety outputs | max. 400 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| no load on outputs | max. 50 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Output type | p-switching, short circuit-proof |
| Напряжение питания | 0.8 x UB ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| Switching current | max. 200 mA |
| Electrical connection values - Output type | Semiconductor outputs, p-switching, short circuit-proof |
| HIGH U(OA,OB) | UB-1.5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| LOW U(OA,OB) | 0 ... 1 V DC |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| DC-13 | 24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| per safety output | 1 ... 400 mA |
| Test pulse duration | max. 0.4 ms |
| Connection type | M12 plug connector, 5-pin |
| Fixing screws | max. 1 Nm |
| Ready delay | 0.5 s |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Storage temperature | -25 ... 70 °C |
| Mounting distance | min. 40 mm |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67 |
| Рабочая температура | -20 ... 55 °C |
| Housing | Plastic, PBT |
| Notices for UL approval | Operation only with UL Class 2 power supply or equivalent measures |
| Switch-on distance | 18 mm |
| Secured switch-off distance s ar | 45 mm (for surface mounting) |
| Secured switching distance s ao | min. 15 mm (for surface mounting) |
| Switching hysteresis | 1 ... 3 mm (for surface mounting) |
| In combination with actuator CES-A-BPA-098775 - Switch-on distance | 22 mm (on surface mounting on aluminum. In a non-metallic environment, the typical operating distances increase to 30 mm) |
| In combination with actuator CES-A-BPA-098775 - Secured switch-off distance s ar | 58 mm |
| In combination with actuator CES-A-BPA-098775 - Secured switching distance s ao | min. 18 mm |
| In combination with actuator CES-A-BPA-098775 - Switching hysteresis | 1 ... 2 mm |
| In combination with actuator CES-A-BRN-100251 - Switch-on distance | 27 mm |
| In combination with actuator CES-A-BRN-100251 - Secured switch-off distance s ar | 75 mm |
| In combination with actuator CES-A-BRN-100251 - Secured switching distance s ao | min. 20 mm (The values apply to surface mounting of the actuator on steel.) |
| In combination with actuator CES-A-BRN-100251 - Switching hysteresis | 3 mm (The values apply to surface mounting of the actuator on steel.) |
| In combination with actuator CES-A-BDA-18-156935 - Switch-on distance | 19 mm (for surface mounting) |
| In combination with actuator CES-A-BDA-18-156935 - Secured switch-off distance s ar | 45 mm (for surface mounting) |
| In combination with actuator CES-A-BDA-18-156935 - Secured switching distance s ao | min. 10 mm (for surface mounting) |
| In combination with actuator CES-A-BDA-18-156935 - Switching hysteresis | 1 ... 3 mm (for surface mounting) |
| Ordernumber | 106798 |
| Масса | 0,191kg |
| Customs tariff number | 85365019000 |
| ECLASS 11.0 | 27-27-24-03 Safety-related transponder switch |