EUCHNER GmbH + Co. KG CET1-AR-CDA-AH-50X-SG-106275
CET1-AR-CDA-AH-50X-SG-106275
Технические характеристики
| Repeat accuracy R | 10 % |
|---|---|
| Напряжение питания | 0.5 ... 8 A |
| Напряжение питания | 0.25 ... 8 A |
| Solenoid | 11 W |
| U B | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| LED1, LED2 | 24 V DC -15% V DC ... +10% V DC |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| DC-13 | 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads) |
| U CM | 24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV |
| Solenoid duty cycle | 100 % |
| Risk time according to EN 60947-5-3 | max. 400 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 5 ms |
| according to UL | 24V DC, Class 2 (For alternatives, see operating instructions) |
| Safety class | III |
| I CM | 450 mA |
| I B | 80 mA |
| Test pulse duration | max. 1 ms |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| HIGH | 15 ... 27.6 V DC Teach-in input J |
| LOW | 0 ... 1 V DC Teach-in input J |
| Output type | Semiconductor output, p-switching, short circuit-proof |
| OUT | 0.8xUB ... UB V DC |
| Electrical connection values - OUT | 1 ... 50 mA |
| Electrical connection values - Output type | Semiconductor outputs, p-switching, short circuit-proof |
| LOW U(OA,OB) | 0 ... 1 V DC |
| HIGH U(OA,OB) | UB-1.5V ... UB V DC (Values at a switching current of 50mA without taking into account the cable lengths) |
| per safety output | 1 ... 200 mA |
| both safety outputs | max. 10 ms |
| Safety outputs | 400 ms |
| Off-state current Ir | max. 0.25 mA |
| Anfahrgeschwindigkeit | max. 20 m/min |
| Connection type | 2 plug connectors M12, 5- and 8-pin |
| Ready delay | 10 s |
| Installation orientation | any |
| Switching frequency | max. 0.5 Hz |
| Degree of freedom X | ±5 mm |
| Degree of freedom Y | ±5 mm |
| Degree of freedom Z | ±4 mm |
| Storage temperature | -25 ... 70 °C |
| Mechanical life | 2 x 10⁶ |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67 (In the inserted and screwed tight state) |
| at U B = 24 V DC | -20 ... 55 °C |
| Safety switch housing | Die-cast aluminum |
| Ramp | Stainless steel |
| Locking force F max | 6500 N |
| Locking force F Zh | 5000 N |
| Guard locking principle | Closed-circuit current principle |
| Notices for UL approval | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
| Ordernumber | 106275 |
| Масса | 1,2kg |
| Customs tariff number | 85365019000 |
| ECLASS 11.0 | 27-27-24-05 Safety-related transponder switch with guardlocking |