EUCHNER GmbH + Co. KG CTP-I2-AS2B-U-HA-AZC-SJ-166889
CTP-I2-AS2B-U-HA-AZC-SJ-166889
Технические характеристики
| Repeat accuracy R | 10 % |
|---|---|
| ASI operating current | max. 50 mA |
| Напряжение питания | 20.4 ... 24 ... 26.4 V |
| Auxiliary current AS-Interface | 400 mA |
| AS-Interface protocol | ASi-3 |
| ASI data out | D0 = control of guard locking |
| ASI data in | D0, D1 = door position, D2, D3 = guard locking |
| AS-Interface slave type | ID-Code: B, EA-Code: 7 |
| Напряжение питания | 26.5 ... 30 ... 31.6 V |
| Safety class | III |
| Anfahrgeschwindigkeit | max. 20 m/min |
| Connection type | 1 plug connector M12, 4-pin |
| Extraction force | 20 N |
| Ready delay | max. 1 s |
| Actuating force | 10 N |
| Installation orientation | any |
| Switching frequency | max. 0.5 Hz |
| Storage temperature | -25 ... 70 °C |
| Mechanical life | 1 x 10⁶ |
| Overtravel | 5 mm |
| Retention force | 20 N |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67/IP69/IP69K (In the inserted and screwed tight state) |
| Рабочая температура | -20 ... 55 °C |
| Safety switch housing | Reinforced thermoplastic |
| Switch head cover | Die-cast zinc |
| Locking force F max | 3900 N |
| Locking force F Zh | 3000 N (Fzh = Fmax/1.3, depending on the actuator used) |
| Guard locking principle | Open-circuit current principle |
| Notices for UL approval | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
| Ordernumber | 166889 |
| Масса | 0,6kg |
| Customs tariff number | 85365019 |
| ECLASS 11.0 | 27-27-24-05 Safety-related transponder switch with guardlocking |