EUCHNER GmbH + Co. KG RGBF02D12-1514-M
RGBF02D12-1514-M
Технические характеристики
| Connection cross section | 0.34 ... 1.5 mm² |
|---|---|
| Напряжение питания | 250 V |
| Напряжение питания | 2.5 kV |
| AC-15 | 6 A 230 V (applies from station 2 with switching element ES502E) |
| DC-13 | 6 A 24 V |
| AC-12 | 10 A 250 V |
| Electrical connection values - AC-15 | 2.5 A 230 V (applies to station 1 with switching element ES514) |
| min. at DC 12V | min. 10 mA (applies from station 2 with switching element ES502E) |
| min. at DC 24V | min. 5 mA (applies to station 1 with switching element ES514) |
| thermal rated current I th | 10 A |
| Anfahrgeschwindigkeit | 0.01 ... 40 m/min |
| 4 x | M25 x 1.5 |
| Number NC contacts | 1 |
| Number of switching elements | 2 |
| Number of NO contacts | 2 |
| Number of positively driven contacts | 1 |
| Design | upright, according to DIN 43697 |
| Actuating element | Chisel plunger (Operating point accuracy ± 0.002. The reproducible operating point accuracy refers to the axial travel of the plunger after the switching element ES 502 E has been run-in with approx. 2,000 operating cycles.) |
| Actuating force | min. 30 N |
| Installation orientation | any |
| Storage temperature | -25 ... 80 °C |
| Mechanical life | 1 x 10⁶ |
| Degree of protection | IP67 |
| Plunger spacing | 12 mm |
| Рабочая температура | -5 ... 80 °C |
| Contact | Silver alloy, gold flashed |
| Housing | Sand-cast aluminum, anodized |
| B 10D | 2 x 10⁶ |
| Additional information | Mixed contact assembly (On upright multiple limit switches, it is necessary to start with the safety station/s from the flange side. If several safety stations are to be installed, these must be installed directly one after the other.) |
| Ordernumber | 087102 |
| Масса | 0,7kg |
| Customs tariff number | 85365019000 |
| ECLASS 11.0 | 27-27-06-02 Multi-position switch |