IF
ifm electronic gmbh AC2451
AS-Interface CompactLine module, CompactModule 4DI M12 V4A
Категории:
Технические характеристики
| Application | field installation |
|---|---|
| Напряжение питания | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA] | 250 |
| Number of inputs and outputs | Number of digital inputs: 4 |
| Number of digital inputs | 4 |
| Input circuit of digital inputs | PNP; (type 2 according to IEC 61131-2) |
| Sensor supply of the inputs | AS-i |
| Напряжение питания | 20...30; (DC) |
| Max. total current rating of inputs [mA] | 200 |
| Input current limitation [mA] | 15 |
| Input current High [mA] | 6...10 |
| Input current low [mA] | 0...2 |
| Switching level high [V] | > 11 |
| Digital inputs protected against short circuits | yes |
| Рабочая температура | -25...80 |
| Storage temperature [°C] | -25...80 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 2000 |
| Protection | IP 67; (when flat cables are used E7400x / E7401x) |
| EMC | EN 61000-6-2; EN 62026-2; EN 50581 |
| MTTF [years] | 382 |
| UL approval | voltage supply: Class 2 |
| AS-i version | 2.11; 3.0 |
| AS-i addressing | IR addressing possible |
| Extended addressing mode | no |
| AS-i master profile | M2; M3; M4 |
| AS-i profile | S-0.0.E |
| AS-i I/O configuration [hex] | 0 |
| AS-i ID code [hex] | 0.E |
| Сертификация | 40501 |
| Data bits | Data bit: D0: D1: D2: D3; Input: 1: 2: 3: 4; Socket: I-1: I-2: I-3: I-4; Pin: 2+4: 2+4: 2+4: 2+4 |
| Масса | 292 |
| Housing | rectangular |
| Type of mounting | AS-i flat cable connection; Backplane mounting |
| Dimensions [mm] | 118.2 x 60 x 27 |
| Материал | PA; Socket: stainless steel (1.4404 / 316L); threaded inserts in the lower part: stainless steel (1.4404 / 316L); screws: stainless steel (1.4578 / 316Cu); Piercing contacts: CuSn6 nickel-plated and tin-plated; O-ring: EPDM |
| Display | Switching status: LED, yellow I1...I4; Power: LED, green AS-i; errors: LED, red |
| Module connection | Flat cable |
| Accessories (optional) | stainless steel sleeve, for installation in case of high mechanical stress , E70402 |
| Remarks | Do not connect any of the following points to an external potential:; I-, I+, I1, I2, I3, I4; The connections are electrically connected with the AS-i cable. |
| Pack quantity | 1 pcs. |
| Connector | M12; coding: A; Contacts: 5 |