ifm electronic gmbh AC246A
AS-Interface Airbox, AirBox 5/2 2DI-Y II 3D
Категории:
Технические характеристики
| Design | housing for DIN rail mounting |
|---|---|
| Application | AS-i ATEX module |
| Напряжение питания | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA] | 300 |
| Integrated watchdog | yes |
| Number of inputs and outputs | Number of digital inputs: 2; Number of pneumatic outputs: 1 |
| Number of digital inputs | 2 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Напряжение питания | 20...30; (via flat cable) |
| Max. total current rating of inputs [mA] | 200 |
| Input current High [mA] | 6...10 |
| Input current low [mA] | 0...2 |
| Switching level high [V] | > 11 |
| Digital inputs protected against short circuits | yes |
| Electrical design | AS-i |
| Number of pneumatic outputs | 1 |
| Рабочая температура | -10...50 |
| Protection | IP 50 |
| ATEX marking | II 3D Ex tc IIIB T80°C Dc X IP50 |
| EMC | EN 50295 |
| MTTF [years] | 351 |
| AS-i version | 2.11; 3.0 |
| AS-i addressing | Addressing socket |
| Extended addressing mode | no |
| AS-i master profile | M2; M3; M4 |
| AS-i profile | S-3.F.F |
| AS-i I/O configuration [hex] | 3 |
| AS-i ID code [hex] | F.F |
| Сертификация | yes |
| Data bits | Data bit: D0: D1: D2: D3; Input: 1: 2: 3: 4; Socket: I-1/2: I-1/2 I-2: -: -; Pin: 4: 2 4: -: -; pneumatic output: -: -: 4: - |
| Масса | 403 |
| Housing | rectangular |
| Type of mounting | quick mounting; Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions [mm] | 108 x 85 x 50 |
| Материал | PA; POM; Piercing contacts: CuSn6 nickel-plated and tin-plated |
| Pneumatic system | 1 x 5/2-way slide valve (free from overlapping) |
| Operating pressure range | 3...8 bar: 0.3...0.8 MPa |
| Air flow at 6/5 bar [l/min] | 500 |
| Permissible compressed air | non-lubricated compressed air class 6-3-1; lubricated compressed air class 6-3-4 |
| Manual override | pressing/releasing or pressing/turning/locking |
| Tube fittings | 8 mm |
| Exhaust | exhaust can be discharged through tube connection |
| Display | Power: LED, green; errors: LED, red; Function: LED, yellow |
| Module connection | Flat cable |
| Items supplied | lower part |
| Accessories (optional) | Mounting plate:, E74999; Module lower part:, E75000; Protective cap: M12, E73004; sealing plug:, E75231; impact protection housing:, E7000A; Silencer:, E75232; Push-in L-fitting:, E75228; Push-in T-fitting:, E75227 |
| Remarks | Mechanical protection has to be implemented.; Otherwise the unit must be installed together with the impact protection housing (E7000A).; If not pneumatically operated, E75231 sealing plug must be inserted.; Avoid ingress of dirt and dust.; Do not connect any of the following points to an external potential:; L-, L+, I-1/2, I-2; The connections are electrically connected with the AS-i cable.; Please see the notes on compressed air and EMC/ESD under "Downloads" |
| Pack quantity | 1 pcs. |
| quick mounting technology for AS-i flat cable | ; three selectable directions |