ifm electronic gmbh AC2910
AS-Interface ProcessLine module, ProcessLine 8DI IP69K
Категории:
Технические характеристики
| Application | sanitary and wet areas in the food industry |
|---|---|
| Напряжение питания | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA] | 500 |
| Number of inputs and outputs | Number of digital inputs: 8 |
| Number of digital inputs | 8; (2 x Slave) |
| Input circuit of digital inputs | PNP; (type 2 according to IEC 61131-2) |
| Sensor supply of the inputs | AS-i |
| Напряжение питания | 18...30; (DC) |
| Max. total current rating of inputs [mA] | 400 |
| Input current High [mA] | 6...10 |
| Input current low [mA] | 0...2 |
| Switching level high [V] | > 11 |
| Digital inputs protected against short circuits | yes |
| Рабочая температура | -5...70 |
| Max. relative air humidity [%] | 90; (linearly decreasing to 50 % (40 °C) non condensing) |
| Max. height above sea level [m] | 2000 |
| Protection | IP 68; IP 69K |
| Pollution degree | 2 |
| EMC | EN 62026-2; EN 61000-6-2 |
| MTTF [years] | 212 |
| AS-i version | 2.1 |
| Extended addressing mode | yes |
| AS-i master profile | M2; M3; M4 |
| AS-i profile | S-0.A.E |
| AS-i I/O configuration [hex] | 0 |
| AS-i ID code [hex] | A.E |
| Сертификация | 88901 |
| Data bits | Data bit: D0: D1: D2: D3; Input: 1: 2: 3: 4; Socket: I-1/2: I-1/2 / I-2: I-3/4: I-3/4 / I-4; Pin: 4: 2 4: 4: 2 4 |
| Масса | 644 |
| Housing | tubular |
| Type of mounting | Mounting base |
| Dimensions [mm] | Ø 137.3 / L = 80 |
| Материал | threaded bush: stainless steel (1.4404 / 316L); LED-Fenster: PC; O-ring: EPDM; Protective cap: PP |
| Display | Power: LED, green; errors: LED, red; Function: LED, yellow |
| Module connection | M12 |
| Items supplied | Protective cap: M12, E70297 |
| Accessories (optional) | Torque wrench:, E70390; Flat cable insulation displacement connector:, E70454 |
| Remarks | Inputs and outputs must be electrically isolated.; Do not connect any of the following points to an external potential:; I-, I+, I-1/2, I-2, I-3/4, I-4; The connections are electrically connected with the AS-i cable.; Default setting of the ID1 codes: slave 1=1 / slave 2=2; The round cable connected to AS-i should not be longer than 2m. |
| Pack quantity | 1 pcs. |
| Connector | M12; coding: A; Contacts: 5; Tightening torque: 1.2...1.4 Nm |