ifm electronic gmbh AC2916
AS-Interface ProcessLine module, ProcessLine 4AI C IP69K
Категории:
Технические характеристики
| Application | sanitary and wet areas in the food industry |
|---|---|
| Напряжение питания | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA] | 450 |
| Reverse polarity protection | yes |
| Number of inputs and outputs | Number of analog inputs: 4 |
| Sensor supply of the inputs | AS-i |
| Напряжение питания | 18...30 |
| Number of analog inputs | 4; (connection of 2- and 3-wire sensors) |
| Analog input (current) [mA] | 4...20 |
| Напряжение питания | 10 |
| Resolution of analog input | 1 bit = 1 µA |
| Precision analog input [%] | 0,5 |
| Рабочая температура | -5...70 |
| Storage temperature [°C] | -25...85 |
| Max. relative air humidity [%] | 90; (linearly decreasing to 50 % (40 °C) non condensing) |
| Max. height above sea level [m] | 2000 |
| Protection | IP 68; IP 69K |
| Pollution degree | 2 |
| EMC | EN 62026-2; EN 61000-6-2 |
| MTTF [years] | 98 |
| AS-i version | 2.11; 3.0 |
| Extended addressing mode | no |
| AS-i master profile | M3; M4 |
| AS-i profile | S-7.3.E |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | 3.E |
| Сертификация | 101108 |
| Масса | 607 |
| Housing | tubular |
| Type of mounting | Mounting base |
| Dimensions [mm] | Ø 137.3 / L = 80 |
| Материал | threaded bush: stainless steel (1.4404 / 316L); LED-Fenster: PC; O-ring: EPDM; Protective cap: PP |
| Display | analog signal: LED, yellow Channels AI1...AI4; Power: LED, green AS-i; errors: LED, red |
| Module connection | M12 |
| Accessories (optional) | Protective cap: M12, E70297; Flat cable insulation displacement connector:, E70455; Torque wrench:, E70390 |
| Remarks | When the sensors and actuators are supplied from AS-i the load must not exceed a maximum of 380 mA.; The load for an individual sensor connection must not exceed 200 mA.; There is an electrical connection between the sensor and AS-i.; MEW = % of the final value of the measuring range |
| Pack quantity | 1 pcs. |
| Connector | 4 x M12; coding: A; Contacts: 4; Tightening torque: 1.2...1.4 Nm |