ifm electronic gmbh AC508S
Safe AS-Interface ClassicLine module with quick mounting technology, ClassicL 2SI AUX 2DOT 2LO OSSD
Категории:
Технические характеристики
| Design | housing for DIN rail mounting |
|---|---|
| Application | AS-i Safety at Work |
| Напряжение питания | 26.5...31.6 DC; (cULus - Class 2 source required) |
| Max. current consumption from AS-i [mA] | 35 |
| Protection class | III |
| Reverse polarity protection | yes |
| Напряжение питания | 19.2...28.8 DC |
| Max. current consumption from additional supply [mA] | 3000; (AUX ; to SELV/PELV) |
| Integrated watchdog | yes |
| Number of inputs and outputs | Number of digital inputs: 2; Number of digital outputs: 2 |
| Number of digital inputs | 2; (2 x safety input) |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AUX |
| Напряжение питания | 19.2...28.8 |
| Max. total current rating of inputs [mA] | 2000 |
| Input current limitation [mA] | 8 |
| Input current High [mA] | > 6 |
| Input current low [mA] | < 2 |
| Switching level high [V] | > 13 |
| Switching level low [V] | < 5 |
| Overload protection digital inputs | yes |
| Short-circuit detection | yes |
| Cross-fault monitoring | no |
| Short-circuit proof | yes |
| Output signal | switching signal |
| Number of digital outputs | 2 |
| Напряжение питания | 19.2...28.8; (AUX) |
| Max. current load per output [mA] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Electrically separated | no |
| Actuator supply outputs | AUX |
| Рабочая температура | -25...55 |
| Рабочая температура | with switched outputs: -25...40 °C |
| Max. relative air humidity [%] | 95 |
| Max. height above sea level [m] | 2000 |
| Protection | IP 67 |
| Pollution degree | 2 |
| EMC | EN 62026-2; EN 61326-3-1 |
| Shock resistance | EN 60068-2-27 |
| Vibration resistance | EN 60068-2-6 |
| Complies with the requirements | ISO 13849-1 Category 4, PL e; IEC 61508 SIL 3 |
| Mission time TM (additional indication) | 20 years |
| PFH [1/h] | 2,33E-11 |
| AS-i version | 2.11; 3.0 |
| AS-i addressing | Addressing socket |
| Extended addressing mode | no |
| AS-i master profile | M3; M4 |
| AS-i profile | S-7.B.E |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | B.E |
| Сертификация | 126301 |
| Data bits | Data bit: D0: D1: D2: D3; assignment: O1: O2: O3: O4 |
| Масса | 315.65 |
| Housing | rectangular |
| Type of mounting | AS-i flat cable connection; Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions [mm] | 103 x 45 x 44.7 |
| Материал | housing: PA; Piercing contacts: CuSn6 nickel-plated and tin-plated |
| Display | Power: 1 x LED, green; errors: 1 x LED, red; Switching status: 1 x LED, yellow; alarm: 1 x LED, red |
| Module connection | Flat cable |
| Items supplied | lower part |
| Accessories (optional) | Addressing cable:, E70213; Protective cap: M12, E73004 |
| Remarks | PL e, cat. 4, SIL 3 only if the fault exclusions described in the manual are used |
| Pack quantity | 1 pcs. |
| quick mounting technology for AS-i flat cable | ; three selectable directions |
| Connector | 1 x M12; coding: A; Contacts: 5; Maximum cable length: 10 m |