ifm electronic gmbh AC5226
AS-Interface ClassicLine module with quick mounting technology, ClassicLine 4AI C AUX IP67
Категории:
Технические характеристики
| Number of inputs and outputs | Number of analog inputs: 4 |
|---|---|
| Design | housing for DIN rail mounting |
| Application | field installation |
| Напряжение питания | 18...31.6 DC |
| Max. current consumption from AS-i [mA] | 50 |
| Reverse polarity protection | yes |
| Max. current load total [A] | 2 |
| Напряжение питания | 16...30 DC; (AUX) |
| Max. current consumption from additional supply [mA] | 2000 |
| Sensor supply of the inputs | AUX |
| Number of analog inputs | 4; (connection of 2-wire, 3-wire and 4-wire sensors) |
| Analog input (current) [mA] | 4...20 |
| Напряжение питания | 10 |
| Analog inputs protected against short circuits | yes |
| Resolution of analog input | 12 bit |
| Accuracy | 0.5; (% of the final value of the measuring range; tolerance under the influence of electromagnetic interference: < ± 1 % of the final value of the measuring range) |
| Рабочая температура | -25...70 |
| Storage temperature [°C] | -25...70 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 2000 |
| Protection | IP 67 |
| EMC | EN 50295; EN 61000-6-2; EN 61000-6-3 |
| MTTF [years] | 105 |
| UL approval | voltage supply: Class 2 |
| AS-i version | 2.11; 3.0 |
| Extended addressing mode | no |
| AS-i master profile | M3; M4 |
| AS-i profile | S-7.3.E |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | 3.E |
| Сертификация | 123501 |
| Масса | 188 |
| Housing | rectangular |
| Type of mounting | quick mounting; AS-i flat cable connection; Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions [mm] | 103 x 45 x 44.7 |
| Материал | PA; Piercing contacts: CuSn6 nickel-plated and tin-plated |
| Display | analog signal: LED, yellow Channels AI1...AI4; Power: LED, green AS-i, AUX; errors: LED, red |
| Module connection | Flat cable |
| Items supplied | lower part |
| Accessories (optional) | Protective cap: M12, E73004 |
| Remarks | There is an electrical isolation between AS-i and AUX and between AS-i and the analog inputs.; The actuator supply on pins 1 and 3 can be used to supply the sensors.; 3-wire connection possible via external link. |
| Pack quantity | 1 pcs. |
| quick mounting technology for AS-i flat cable | ; three selectable directions |
| Connector | M12; coding: A |