ifm electronic gmbh AC5230
AS-Interface ClassicLine module with quick mounting technology, ClassicLine 1AI C 1AO C 2DI
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital inputs: 2; Number of analog inputs: 1; Number of analog outputs: 1 |
|---|---|
| Design | housing for DIN rail mounting, Only for operation with AS-i masters with the profile M4 |
| Application | field installation |
| Напряжение питания | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA] | 250 |
| Reverse polarity protection | yes |
| Max. current load total [A] | 0.2 |
| Integrated watchdog | yes |
| Number of digital inputs | 2 |
| Input circuit of digital inputs | PNP |
| Sensor supply of the inputs | AS-i |
| Напряжение питания | 18...30; (DC) |
| Number of analog inputs | 1; (connection of 2-wire, 3-wire and 4-wire sensors) |
| Analog input (current) [mA] | 4...20 |
| Напряжение питания | 10 |
| Short-circuit proof | yes |
| Resolution | 12 bit |
| Number of analog outputs | 1; (connection of 2-wire, 3-wire and 4-wire actuators) |
| Analog current output [mA] | 4...20 |
| Напряжение питания | 10 |
| Resolution of analog output | 12 bit |
| Actuator supply outputs | AS-i |
| Measuring error [% of the final value] | 0,5 |
| Рабочая температура | -25...70 |
| Storage temperature [°C] | -25...70 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 2000 |
| Protection | IP 67 |
| EMC | EN 50295; IEC 61000-6-2 |
| MTTF [years] | 137 |
| UL approval | voltage supply: Class 2 |
| AS-i version | 3.0 |
| Extended addressing mode | no |
| AS-i master profile | M4 |
| AS-i profile | S-7.5.5 |
| AS-i I/O configuration [hex] | 7 |
| AS-i ID code [hex] | 5.5 |
| Масса | 162.6 |
| Housing | rectangular |
| Type of mounting | quick mounting; AS-i flat cable connection; Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions [mm] | 103 x 45 x 44.7 |
| Материал | PA; Piercing contacts: CuSn6 nickel-plated and tin-plated |
| Display | analog signal: LED, yellow Channels AI1, AO1; Switching status: LED, yellow Channels I1...I2; Power: LED, green AS-i; errors: LED, red |
| Module connection | Flat cable |
| Items supplied | lower part |
| Accessories (optional) | Protective cap: M12, E73004 |
| Remarks | 3-wire connection possible via external link.; The actuator supply on pins 1 and 3 can be used to supply the sensors / actuators.; In this case, an electrical isolation to AS-i is not given.; The analog inputs and outputs (pins 2 and 4) are electrically separated and have no connection to AS-i.; Do not connect any of the following points to an external potential:; I-1/2, I-2, Pin 1, Pin 3; The connections are electrically connected with the AS-i cable. |
| Pack quantity | 1 pcs. |
| ; Maximum cable length | 30 m |
| Connector | M12; coding: A; Contacts: 5; Maximum cable length: 30 m |