AL2627

ifm electronic gmbh AL2627

IO-Link input/output module, IOL MOD PL 8XDX/DX E D M12 IP67

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): AL2627
  • Статус производства: Не определён

Технические характеристики

Напряжение питания18...30 DC
Current consumption [mA]100; (US)
Protection classIII
Напряжение питания18...30 DC; (UA)
Max. current consumption from additional supply [mA]16000; (UA)
Total number of inputs and outputs16
Number of inputs and outputsNumber of digital inputs: 16; Number of digital outputs: 16
Number of digital inputs16; (configurable)
Input circuit of digital inputsPNP; (type 3 (IEC 61131-2))
Sensor supply of the inputsAUX (UA)
Напряжение питания18...30
Input current High [mA]2...15
Input current low [mA]0...1.5
Switching level high [V]11...28
Switching level low [V]0...5
Number of digital outputs16; (configurable)
Max. current load per output [mA]2000
Max. current load outputs total [A]16
Short-circuit protectionyes
Actuator supply outputsAUX (UA)
Communication interfaceIO-Link
Transmission typeCOM3 (230,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesCommon - I&D: Identification and Diagnosis
SIO modeno
Required master port classA
Min. process cycle time [ms]4
Supported DeviceIDsType of operation: DeviceID; default: 1314
NoteParameterization can be changed from cyclical to acyclical.; For further information please see the IODD PDF file at "Downloads"
Рабочая температура-25...60
Storage temperature [°C]-25...70
Max. relative air humidity [%]90
Max. height above sea level [m]2000
ProtectionIP 65; IP 67
Protection rating (NEMA 250)6P
Pollution degree2
Chemical mediaISO 16750-5: AA, BA, BD, HLP, CC, DB, DC, DD, CA; NEMA 250 5.13.1: AA
EMCEN 61000-6-2; EN 61000-6-4; IEC 61131-9
Shock resistanceDIN EN 60068-2-27
Vibration resistanceDIN EN 60068-2-64; DIN EN 60068-2-6
MTTF [years]59
Complies with the requirementsISO 13849-1 PL d
Масса399
Dimensions [mm]26 x 59.3 x 208
Материалhousing: PA orange; Socket: brass nickel-plated
МатериалFKM
Tightening torque [Nm]< 0.8
DisplayPower: 1 x LED, green; fault: 1 x LED, red; Function: 1 x LED, yellow
Accessories (optional)protective cap for M12 sockets
RemarksUsing the device within a system with requirements for functional safety is possible by deactivating the actuator voltage UA without interaction.; For further information on functional safety, please refer to the operating instructions supplement under “Downloads”.
Pack quantity1 pcs.
Connector8 x M12; coding: A; Contacts: 4; sealing: FKM
Получить предложение по этой позиции