ifm electronic gmbh CR1077
Programmable Human Machine Interface, ecomatDisplay/7"/Touch
Технические характеристики
| Communication interface | Ethernet; CAN; USB |
|---|---|
| Operating elements | 6: freely programmable, RGB backlit function keys; 1: RGB backlit rocker switch with push function |
| Display type | TFT LCD color display with touch function |
| Напряжение питания | 8...32 DC; (For information on how to protect the device, please refer to the operating instructions.) |
| Напряжение питания | 12 / 24 |
| Current consumption [mA] | < 1125; (24 V DC; with switched outputs: < 5000 mA) |
| Power consumption [W] | 27 |
| Reverse polarity protection | yes; (in case of supply via the on-board system / battery) |
| Number of inputs and outputs | Number of digital inputs: 2; Number of digital outputs: 2 |
| Number of digital inputs | 2 |
| Number of video inputs | 4; (analog) |
| Video input | 1 Vss, 75 Ohm, PAL, NTSC |
| Audio input | Stereo Line-In |
| Digital input | function type: binary, low-side, CSI; input range [V]: 0...32; Switching level high [V]: > 70 % VBB30; Switching level low [V]: < 30 % VBB30; input frequency [Hz]: < 20; input resistance [Ω]: 10000 |
| Number of digital outputs | 2 |
| Max. current load per output [mA] | 2500 |
| Switching frequency DC [Hz] | < 20 |
| Audio output | Stereo; ≥ 16 Ω |
| Digital output | function type: binary, high-side, CSO; Voltage range [V]: 8...32; switching current [A]: 0,025...2,5; protective circuitry: inductive load, thermal protection; Diagnostic functions: short circuit |
| PWM output | output frequency [Hz]: < 20 |
| Parameter setting options | CODESYS 3.5; Qt |
| PLC function to IEC 61131-3 | yes |
| Operating system | Embedded Linux |
| Number of CAN interfaces | 4 |
| Number of Ethernet interfaces | 2 |
| Number of USB interfaces | 2 |
| Number of video interfaces (CVBS) | 4; (1 Vss, 75 Ohm, PAL, NTSC) |
| Transmission rate | < 480 MBit/s |
| Protocol | TCP/IP; UDP; Modbus TCP; OPC UA; EtherNet/IP; PROFINET; EtherCAT |
| Profile | CiA DS 301 Version 4; CiA DS 401 Version 1.4 |
| Interface | CAN Interface 2.0 A/B ISO 11898 |
| Factory settings | Transmission rate: 250 kBit/s |
| Transmission standard | 10Base-T; 100Base-TX |
| Note on interfaces | Host-Controller |
| Version | 2.0 |
| Рабочая температура | -35...65 |
| Рабочая температура | 2000 m: -30...65 °C; 3000 m: -30...60 °C; The temperature of the mainboard must not exceed 85 °C.; for further information please see the operating instructions |
| Storage temperature [°C] | -35...85 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 3000 |
| Protection | IP 65; IP 67; (for inserted connectors with individually sealed cores and inserted M12 connectors or sealing caps: IP 67) |
| Pollution degree | 2; (before installation and when the device is replaced) |
| Chemical media | ISO 16750-5: AA, BA, BD, CC, DB, DC, DD, ED; only one chemical permitted at a time |
| EMC | UN/ECE-R10 Noise emission and noise interference:: 100 V/m noise immunity; DIN EN 61000-6-2: noise immunity; DIN EN 61000-6-4: noise emission; ISO 10605 ESD: 330 pF / 2000 Ohm; DIN EN ISO 13766-1: ± 6 kV contact discharge / (150 pF / 330 pF) / ± 8 kV air discharge / function state C; ISO 7637-2 pulse 1: severity level 4 / function state C (24 V); ISO 7637-2 pulse 2a: severity level 4 / function state A (24 V); ISO 7637-2 pulse 2b: severity level 4 / function state C (24 V); ISO 7637-2 pulse 3a: severity level 4 / function state A (24 V); ISO 7637-2 pulse 3b: severity level 4 / function state A (24 V); ISO 7637-2 pulse 4: severity level 4 / function state A (24 V); ISO 7637-2 pulse 5: severity level 3 / function state C (24 V); ISO 7637-2 pulse 4: severity level 4 / function state A (12 V) |
| Continuous shock resistance | ISO 16750-3: 30 g 6 ms / 24000 shocks |
| Vibration resistance | ISO 16750-3 Test VII: random, mounting place car body; EN 60068-2-6 sine: 10...500 Hz 0.72 mm/10 g / 10 cycles/axis, sine |
| Climatic tests | EN 60068-2-30 damp heat: cyclical: 55 °C upper temperature limit / 6 cycles; EN 60068-2-78 damp heat: constant: 40 °C 93 % rH / test period 21 days |
| Salt spray test | EN 60068-2-52 Salt spray: test method 3 / motor vehicle |
| MTTF [years] | 37 |
| Railway applications | DIN EN 50155 Pkt 13.3; EN 50121-3-2; EN 55016 |
| Масса | 1549.8 |
| Housing | rectangular |
| Type of mounting | panel/surf.; surface mounting with RAM mount system; panel mounting with mounting handle; (panel cutout: 213 x 128 mm) |
| Dimensions [mm] | 137.4 x 223.6 x 46.5 |
| Материал | housing: diecast aluminium black powder-coated RAL 9005; Display: glass chemically hardened and anti-reflective color display in optical bonding technology; diaphragm: Gore-Tex |
| Information on service life | Pushbuttons:: 1000000 Betätigungen; Navigation key with pushbutton:: 1000000 Betätigungen; Display LED lifetime:: > 70000 h |
| Display | Status LED: 1 LED, multi-color freely programmable; Display: display rotation: 4 x 90° |
| Display resolution | 800 x 480 |
| Display size | 7" |
| Aspect ratio | 16:10 |
| Display background illumination | LED |
| Color depth | 18 Bit |
| Brightness [cd/m²] | > 800; (adjustable: 0...100 %; In steps of: 1 %) |
| Contrast ratio | 1000:1 |
| Touchscreen version | PCAP; (recognition up to 10 fingers, optimized for wet conditions and gloves) |
| Acoustic signal | integrated audio stereo output and headphone output |
| Processor | Quad Core 64 Bit 1,2 GHz + GPU |
| Working memory | 1 GByte RAM |
| Mass storage | 18 GByte Flash |
| Non-volatile memory | 16 kByte |
| Real-time clock | yes; UTC, battery buffered |
| Items supplied | battery: 1 x CR1225 (3 V, 48 mAh), fitted |
| Remarks | maximum cable length for connection to the video inputs: 30 m; Further information is available in the manual. (audio input) |
| Pack quantity | 1 pcs. |
| Connector | 2 x M12; coding: B; Contacts: 5 |